TOSR122 - 2 Channel Smartphone WiFi Relay - (Password/Momentary/Latching)

Description

TOSR122 WiFi Relay kit support both Andorid and iOS and it has password.
It's a convenient and easy-to-use product that be used to control any electrical equipments.
You may wish to control it with a mobile phone or a computer (etc). After configuring the WiFi module, your WiFi relay board will have a valid IP address. then
Open the APP->Connect Device, Input the IP, port number and connect it, and then you can control the relays ON/OFF. The communication way can also be changed easily. Remove the WiFiBee module instead with a BluetoothBee, it becomes a Bluetooth relay.
TOSR122 is an upgraded version of TOSR02.
It supports password. It can be set to latching or momentary outputs
. TOSR122 allows computer control switching of external devices by using the USB port of your computer. It also has a wireless external port, which can works with XBee or BluetoothBee or WiFiBee, so you can control your device via zigbee or Bluetooth or WiFi!
The TOSR122 provides two volt free contact relay outputs with a current rating of up to 10Amp each. One DS18B20 temperature sensor port. The module is powered from a 5VDC power supply(or USB). The DC input jack is 2.1mm with positive core polarity. The relays are SPDT types. If you want to power it with DC12V or 24V, you just need a 12V/24V - 5V DC converter.
Note
: Relay board default password is: 123456
Note
: Please remove the WiFi module when you use USB connection.
Smartphone APP:
We also provide FREE Android/iOS App. You can control your device by your phone very easily.
Android APP(WiFi)
iPhone APP (WIFI)
Relay power rating
If the relay is used at a voltage or current exceeding this specification, the life of the contacts may be significantly shortened.
A full datasheet for the relays used on the
TOSR122
is here:
G5LA datasheet
If you use DC Power ,the Input voltage should be DC5V.
First Step - Install the Driver
The
TOSR122
module uses FT232RL USB to UART chip . Before using the TOSR122 you will need to download the
FT232RL Driver
.
Connect the TOSR122 and windows will detect it and ask for the drivers. Point windows to the inf folder and it will install the driver.
The TOSR122 will now appear as a com port.
Commands
The TOSR122 operates with an easy to use command set as described in the table below.
TOSR122
Baud rate : 9600
Test program
To get the TOSR122 up and running in the minimum amount of time we have put together an example program to demonstrate the functionality of the module.
Features:
Working voltage: 5VDC
Dimension: 89.5x45x17.2(mm)
Standby Current 10mA/5VDC
Current rating of up to 10 Amp
Latching or momentary outputs
Password supported
Documents:
User Manual
G5LA datasheet
FT232RL Driver
Test Program
Realterm serial debug tool
How to disable the password
Android APP(Bluetooth)
Android APP(WiFi)
iPhone APP (Bluetooth)
iPhone APP (WIFI)
WIFI configure guide video (Andorid)
WIFI configure guide video (iPhone)